List Price: $24.99
Sale Price: $15.59
You save: $9.40 (38%)

See Reviews For This Product

Description

Ideal for all basic water testing applications. The best value meter in the world! .. Economy model that is ideal for end-users. .. Highly efficient and accurate due to its advanced microprocessor technology. .. Hold Function: saves measurements for convenient reading and recording. .. Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries. .. Measurement Range: 0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1ppm. From 1000 to 9990 ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image. .. Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. ...

Features

• Economy model that is ideal for end-users.
• Highly efficient and accurate due to its advanced microprocessor technology.
• Hold Function: saves measurements for convenient reading and recording.
• Auto-off function: the meter shuts off automatically after 10 minutes of non-use.
• Measurement Range: 0-9990 ppm. Display: large and easy-to-read LCD screen.

List Price: $31.99
Sale Price: $16.99
You save: $15.00 (47%)

See Reviews For This Product

Description

The Milwaukee Instruments pH Pen, PH600 is an easy to use pH meter. It features +- 0.2 Accuracy, one-point calibration and a long battery life (hours of continuous use). Calibration solution not included.

Features

• Includes protective cap
• Includes calibration screwdriver
• Batteries included
• Instructions included

List Price: $49.99
Sale Price: $31.67
You save: $18.32 (37%)

See Reviews For This Product

Description

ZeroWater is the only filtered water from a pitcher that meets the FDA definition for purified bottled water. The Pitcher comes with the following products: One ZeroWater filter cartridge that removes contaminants that cause water to have an unpleasant taste. An independently made TDS Meter to give you peace of mind that your ZeroWater filter cartridges are working properly. It also lets you know when to replace the filters. When your water starts reading 006 it's time for a change. The one-chamber Pitcher with lid has a pour spout, exclusive in-fridge push button dispenser and a special storage compartment for the TDS Meter. More complete filtration than ordinary carbon filters Clean, crisp taste Includes one Pitcher, one filter, and one TDS meter.   Filtered potable tap water tested by an independent lab (not the FDA) to meet specifically the water quality requirements for using the label purified. Compared to water produced by leading gravity fed filters. 

Features

• 5-stage dual Ion Exchange filter removes virtually all dissolved solids from tap water
• As effective at reducing chromium-6 in tap water as reverse osmosis systems
• Includes electronic TDS water testing meter
• Fits in the refrigerator; flip-up lid for easy refilling
• ZeroWater offers a filter recycle program. They recycle the plastic and regenerate the resin used in the filter process

Sale Price: $62.25

See Reviews For This Product

Description

Highly stable and accurate readings with large LCD display. Designed for simple one-hand operation. Simultaneously displays the parameter being measured and temperature in ºC or ºF. Features automatic temperature compensation, 2 pt. calibration, auto power off, hold function, and a low battery indicator. The case is IP65 waterproof, and will float if accidentally dropped into the water. Comes with 4 button-cell batteries and a built-in probe with protective cap.
Dim: 6 ½ x 1 ½ x 1 ½" (165 x 38 x 38 mm). Weight: 2 ½ oz (68 g).

Features

• Range: 0~10 ppt / Resolution: 0.01 ppt
• Range: 10~70 ppt / Resolution: 0.1 ppt
• Accuracy: 1% fs + 1d
• Temperature in ºC or ºF
• Automatic Temperature Compensation (ATC)

Sale Price: $19.99

See Reviews For This Product

Description

This is a brand new professional-grade EC/TDS/CF meter. What a great value! With a built-in automatic temperature compensation system (ATC).Total Dissolved Solids (TDS) are the total weight of all solids (minerals, salts, or metals) that are dissolved in a given volume of water, Expressed in milligrams per liter (mg/L), or In parts per million (ppm). The lower the TDS level in the water, the more efficiently you body's cells actually get hydrated by the water you drink. The higher the TDS level in the water, the greater the probability of harmful contaminants that can pose health risks of hinder the absorption of water molecules on the cellular level.

Features

• Measuring Range: 0 - 1990 ppm (mg/l)
• Resolution: 10 ppm
• Accuracy (@20°C/68°F): ±2 % F.S
• Calibration: manual, 1 point
• Temperature Compensation: Automatic from 41° - 122°F (5° - 50°C)

List Price: $35.00
Sale Price: $15.99
You save: $19.01 (54%)

See Reviews For This Product

Description

TDS Meter - Tester To Test For Total Disolved Solids In Water - Reverse Osmosis Membrane Tester The Only Way To Know If Your Reverse Osmosis RO Membrane Is Performing Correctly - Tests for TDS - Total Dissolved Solids. A Must For All RO System Owners. Compare Incoming Feed Water To Treated Water - Replace Membrane If Less Than 80% of TDS Is Being Removed - Total dissolved solids (TDS) are the total weight of all solids (minerals, salts or metals) that are dissolved in a given volume of water expressed in milligrams per liter (mg/L), or in parts per million (PPM). The lower the TDS level in the water, the more efficiently your body's cells actually get hydrated by the water that you drink. The higher the TDS levels in the water, the greater the probability of harmful contaminants that can pose health risks or hinder the absorption of water molecules on the cellular level. 17 PPM of TDS = 1 grain of hardness. Hold Function: saves measurements for convenient reading and recording. Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries. Measurement Range: 0-9990ppm. From 0-999ppm, the resolution is in increments of 1ppm. From 1,000 to 9,990ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image. Display: large and easy-to-read LCD screen. Factory Calibrated: recalibration is not necessary, but can be done easily with a watch screwdriver. There's no need for messy solutions to initially calibrate the meter. Range: 0 - 9990ppm (mg/L) Accuracy: +/- 2% ATC: Built-in sensor for Automatic Temperature Compensation of 1 to 50 degrees Celsius (33 to 122 degrees Farenheit) Power source: 2 x 1.5V button cell batteries (included) Battery life: over 1,000 hours of continuous use Dimensions: 14 x 2.3 x 1.5cm (5.5 x .9 x .55 inches) Weight: 32g (1.13 oz) We really like this tester and think that anyone who wants to know about the quality of their water should have one of these TDS Meter Testers.

Features

• The smallest and lightest TDS meter on the market.
• Advanced microprocessor technology.
• Hold Function: saves measurements for convenient reading and recording.
• Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries.
• Measurement Range: 0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1 ppm. Large and easy-to-read LCD screen

Sale Price: $14.25

See Reviews For This Product

Description

Measurement Range: 0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1ppm. From 1000 to 9990 ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image.

Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver.

Fun, translucent blue housing that's very strong and durable.

Includes a TDS chart sticker on the back of the meter that explains TDS values.

Comes in a retail-oriented package.

Features

• Economy model that is ideal for end-users.
• Highly efficient and accurate due to its advanced microprocessor technology.
• Hold Function: saves measurements for convenient reading and recording.
• Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries.
• Display: large and easy-to-read LCD screen.

Tasters Choice Hazelnut Instant Coffee, 20-Count Sticks (Pack of

List Price: $28.50
Sale Price: $24.03
You save: $4.47 (16%)

See Reviews For This Product

Description

Enjoy this quality blend of coffee with the tempting flavors of Hazelnut for a smooth, nutty, delicious cup. A perfect cup to wake your senses.

Features

• The single-serve packets are optimized for 6oz. of hot water
• Made with a fine blend of Robusta and Arabica beans
• Enjoy this quality blend of of Hazelnut for a smooth, nutty, delicious cup
• Real beans used to make real coffee
• Gluten Free, Certified Kosher

Sale Price: $17.89

See Reviews For This Product

Description

This item is without retail box
Features :
With slim line pen-style design, it's easy to use and store.
Highly convenient, efficient and accurate
Display: Easy-to-read screen
Hold Function: Saves measurements for convenient reading and recording
Measurement Range: 0 - 1999ppm (mg/L)
Resolution: 1 ppm
Accuracy: +/- 2%F.S <
Power Supply: 2 x 3V (CR2030 Battery)
Dimension: 148mm (L) x 32mm (W) x 20mm (T) / 5.83inch (L) x 1.26inch (W) x 0.79inch (T)
Operating Temperature: 0°-50°(32°F-122°F)
6)Size: 150x27x20mm
7)With TDS calibration solution (1382ppm 25°C)

Features

• Highly convenient
• Display: Easy-to-read screen
• Saves measurements for convenient reading and recording
• Measurement Range: 0 - 1999ppm
• efficient and accurate

Sale Price: $99.99

See Reviews For This Product

Description

Data Hold, Auto Power off and low battery indication. Automatic Temperature Compensation of 2% per degree. Simultaneous display of Conductivity or TDS plus Temperature. Internal memory stores up to 15 labeled readings for easy recall. Self calibration of electronics on power up. Easy to replace Conductivity cell module. Waterproof design to withstand wet environment.

Features

• 6 selectable units of measurement--mS, mS, ppm, ppt, mg/L and g/L
• Automatic temperature compensation
• Automatic self calibration
• Stores/recalls up to 15 labeled readings
• Adjustable conductivity to TDS ratio factor from 0.4 to 1.0