List Price: $24.99
Sale Price: $15.59
You save: $9.40 (38%)

See Reviews For This Product

Description

Ideal for all basic water testing applications. The best value meter in the world! .. Economy model that is ideal for end-users. .. Highly efficient and accurate due to its advanced microprocessor technology. .. Hold Function: saves measurements for convenient reading and recording. .. Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries. .. Measurement Range: 0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1ppm. From 1000 to 9990 ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image. .. Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. ...

Features

• Economy model that is ideal for end-users.
• Highly efficient and accurate due to its advanced microprocessor technology.
• Hold Function: saves measurements for convenient reading and recording.
• Auto-off function: the meter shuts off automatically after 10 minutes of non-use.
• Measurement Range: 0-9990 ppm. Display: large and easy-to-read LCD screen.

List Price: $31.99
Sale Price: $16.99
You save: $15.00 (47%)

See Reviews For This Product

Description

The Milwaukee Instruments pH Pen, PH600 is an easy to use pH meter. It features +- 0.2 Accuracy, one-point calibration and a long battery life (hours of continuous use). Calibration solution not included.

Features

• Includes protective cap
• Includes calibration screwdriver
• Batteries included
• Instructions included

List Price: $49.99
Sale Price: $31.67
You save: $18.32 (37%)

See Reviews For This Product

Description

ZeroWater is the only filtered water from a pitcher that meets the FDA definition for purified bottled water. The Pitcher comes with the following products: One ZeroWater filter cartridge that removes contaminants that cause water to have an unpleasant taste. An independently made TDS Meter to give you peace of mind that your ZeroWater filter cartridges are working properly. It also lets you know when to replace the filters. When your water starts reading 006 it's time for a change. The one-chamber Pitcher with lid has a pour spout, exclusive in-fridge push button dispenser and a special storage compartment for the TDS Meter. More complete filtration than ordinary carbon filters Clean, crisp taste Includes one Pitcher, one filter, and one TDS meter.   Filtered potable tap water tested by an independent lab (not the FDA) to meet specifically the water quality requirements for using the label purified. Compared to water produced by leading gravity fed filters. 

Features

• 5-stage dual Ion Exchange filter removes virtually all dissolved solids from tap water
• As effective at reducing chromium-6 in tap water as reverse osmosis systems
• Includes electronic TDS water testing meter
• Fits in the refrigerator; flip-up lid for easy refilling
• ZeroWater offers a filter recycle program. They recycle the plastic and regenerate the resin used in the filter process

Sale Price: $62.25

See Reviews For This Product

Description

Highly stable and accurate readings with large LCD display. Designed for simple one-hand operation. Simultaneously displays the parameter being measured and temperature in ºC or ºF. Features automatic temperature compensation, 2 pt. calibration, auto power off, hold function, and a low battery indicator. The case is IP65 waterproof, and will float if accidentally dropped into the water. Comes with 4 button-cell batteries and a built-in probe with protective cap.
Dim: 6 ½ x 1 ½ x 1 ½" (165 x 38 x 38 mm). Weight: 2 ½ oz (68 g).

Features

• Range: 0~10 ppt / Resolution: 0.01 ppt
• Range: 10~70 ppt / Resolution: 0.1 ppt
• Accuracy: 1% fs + 1d
• Temperature in ºC or ºF
• Automatic Temperature Compensation (ATC)

Sale Price: $19.99

See Reviews For This Product

Description

This is a brand new professional-grade EC/TDS/CF meter. What a great value! With a built-in automatic temperature compensation system (ATC).Total Dissolved Solids (TDS) are the total weight of all solids (minerals, salts, or metals) that are dissolved in a given volume of water, Expressed in milligrams per liter (mg/L), or In parts per million (ppm). The lower the TDS level in the water, the more efficiently you body's cells actually get hydrated by the water you drink. The higher the TDS level in the water, the greater the probability of harmful contaminants that can pose health risks of hinder the absorption of water molecules on the cellular level.

Features

• Measuring Range: 0 - 1990 ppm (mg/l)
• Resolution: 10 ppm
• Accuracy (@20°C/68°F): ±2 % F.S
• Calibration: manual, 1 point
• Temperature Compensation: Automatic from 41° - 122°F (5° - 50°C)

Sale Price: $22.95

See Reviews For This Product

Description

Ideal for all water purification applications, wastewater regulation, aquaculture, hydroponics, and colloidal silver. Perfect for both consumer or commercial use. Carry one in your pocket or toolbox at all times!

Features
Ideal for commercial use. Includes a carrying case with belt clip.
Highly efficient and accurate due to its advanced microprocessor technology.
Hold Function: saves measurements for convenient reading and recording.
Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries.
Measurement Range: 0-9990 µS. From 0-999 µS, the resolution is in increments of 1 µS. From 1000 to 9990 µS, the resolution is in increments of 10 µS, indicated by a blinking 'x10' image.
Built-in digital thermometer
Display: large and easy-to-read LCD screen.
Factory Calibrated: our meters are calibrated with a 700 µS NaCl solution. Meters can be recalibrated with a mini-screwdriver.

Specifications
TDS Range: 0 - 9990 µS (µS/cm)

Temp. Range: 0 - 80 degrees Celsius

Resolution: 1 µS; 10 µS, 0.1 degree Celsius

Accuracy: +/- 2%

ATC: Built-in sensor for Automatic Temperature Compensation of 1 to 50o C (33 to 122o F)

Power source: 2 x 1.5V button cell batteries (included)

Battery life: 1000 hours of usage

Dimensions: 15.5 x 3.1 x 2.3cm (6.1 x 1.25 x 1 inches)

Weight with case: 76.5g (2.7 oz)

Weight without case: 56.7g (2 oz)

Features

• Ideal for commercial use. Includes a carrying case with belt clip.
• Highly efficient and accurate due to its advanced microprocessor technology.
• Hold Function: saves measurements for convenient reading and recording.
• Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries.
• Measurement Range: 0-9990 µS. From 0-999 µS, the resolution is in increments of 1 µS. From 1000 to 9990 µS, the resolution is in increments of 10 µS, indicated by a blinking 'x10' image.

Sale Price: $19.89

See Reviews For This Product

Description

Features :
Hold function :saves measurements for convenient reading and recording
Auto-off function:turn off meter 10 minutes of non-use to save batteries
Extended Range: measure from 0 to 999 ppm with a resolution of 1 ppm.From 1000 to 9990 ppm,the res,is 10ppm.
Temp range:0-99Celsius
Accuracy:±2%
Battery:1×3V(button on),the battery is included.

Features

• Convenient and Useful

See Reviews For This Product

Description

Digital Tds Meter Filter Water Quality/ Ppm/ Purity Tester. Product Specifications: Color: Blue TDS Range: 0 - 9990 ppm (mg/L) Temp. Range: 0 - 99ºC Accuracy: ±2% Power By: 2 x 3V CR2030 Batteries Dimensions: 148mm x 32mm x 20mm A perfect daily item for personal & family usage Used to monitor drinking water quality, aquariums, pools & spas Measures the amount of ions in the water & convert that amount to a number which displays on the screen Displays the amount of total dissolved solids(TDS) in water The cleanest water would display a reading of "000" Hold function saves measurements for convenient reading & recording Large, easy-to-read screen display Convenient, efficient & accurate Slim pen-style design, easy to use & store What's Included In The Package: 1 x Digital TDS Meter Filter Water Quality/ ppm/ Purity Tester

List Price: $51.95
Sale Price: $41.90
You save: $10.05 (19%)

See Reviews For This Product

Description

Replacement pH probe MA73600 for pH51.

Features

• OEM Replacement Part

Sale Price: $45.95

See Reviews For This Product

Description

CONDUCTIVITY/TDS PROBE DIRECT PLUG FOR C66 & T76Notice:Milwaukee Instruments can be called directly for any technical/operational questions at 1-877-283-7837Warranty: Milwaukee/Martini Instruments warrants its instruments to be free from manufacturing defects. NOTE: This product ships direct from the manufacturer and should arrive in 7-14 days after completion of your order.