Meter Tester Hydroponics

List Price: $24.99
Sale Price: $15.59
You save: $9.40 (38%)

See Reviews For This Product

Description

Ideal for all basic water testing applications. The best value meter in the world! .. Economy model that is ideal for end-users. .. Highly efficient and accurate due to its advanced microprocessor technology. .. Hold Function: saves measurements for convenient reading and recording. .. Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries. .. Measurement Range: 0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1ppm. From 1000 to 9990 ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image. .. Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. ...

Features

• Economy model that is ideal for end-users.
• Highly efficient and accurate due to its advanced microprocessor technology.
• Hold Function: saves measurements for convenient reading and recording.
• Auto-off function: the meter shuts off automatically after 10 minutes of non-use.
• Measurement Range: 0-9990 ppm. Display: large and easy-to-read LCD screen.

List Price: $31.99
Sale Price: $16.99
You save: $15.00 (47%)

See Reviews For This Product

Description

The Milwaukee Instruments pH Pen, PH600 is an easy to use pH meter. It features +- 0.2 Accuracy, one-point calibration and a long battery life (hours of continuous use). Calibration solution not included.

Features

• Includes protective cap
• Includes calibration screwdriver
• Batteries included
• Instructions included

List Price: $35.00
Sale Price: Too low to display

See Reviews For This Product

Description

TDS Meter - Tester To Test For Total Disolved Solids In Water - Reverse Osmosis Membrane Tester The Only Way To Know If Your Reverse Osmosis RO Membrane Is Performing Correctly - Tests for TDS - Total Dissolved Solids. A Must For All RO System Owners. Compare Incoming Feed Water To Treated Water - Replace Membrane If Less Than 80% of TDS Is Being Removed - Total dissolved solids (TDS) are the total weight of all solids (minerals, salts or metals) that are dissolved in a given volume of water expressed in milligrams per liter (mg/L), or in parts per million (PPM). The lower the TDS level in the water, the more efficiently your body's cells actually get hydrated by the water that you drink. The higher the TDS levels in the water, the greater the probability of harmful contaminants that can pose health risks or hinder the absorption of water molecules on the cellular level. 17 PPM of TDS = 1 grain of hardness. Hold Function: saves measurements for convenient reading and recording. Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries. Measurement Range: 0-9990ppm. From 0-999ppm, the resolution is in increments of 1ppm. From 1,000 to 9,990ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image. Display: large and easy-to-read LCD screen. Factory Calibrated: recalibration is not necessary, but can be done easily with a watch screwdriver. There's no need for messy solutions to initially calibrate the meter. Range: 0 - 9990ppm (mg/L) Accuracy: +/- 2% ATC: Built-in sensor for Automatic Temperature Compensation of 1 to 50 degrees Celsius (33 to 122 degrees Farenheit) Power source: 2 x 1.5V button cell batteries (included) Battery life: over 1,000 hours of continuous use Dimensions: 14 x 2.3 x 1.5cm (5.5 x .9 x .55 inches) Weight: 32g (1.13 oz) We really like this tester and think that anyone who wants to know about the quality of their water should have one of these TDS Meter Testers.

Features

• The smallest and lightest TDS meter on the market.
• Advanced microprocessor technology.
• Hold Function: saves measurements for convenient reading and recording.
• Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries.
• Measurement Range: 0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1 ppm. Large and easy-to-read LCD screen

List Price: $50.00
Sale Price: $14.98
You save: $35.02 (70%)

See Reviews For This Product

Description

Empowers You to Save Hundreds on Electric Bills Electricity bills are rising. Now you can cut down on costs and find out what appliances are actually worth keeping plugged in. Simply connect these appliances to the Kill A Watt, and it will assess how efficient they really are. The large LCD display counts consumption by the kilowatt-hour, the same as your local utility. You can calculate your electrical expenses by the day, week, month, even an entire year. Also check the quality of your power by monitoring voltage, line frequency, and power factor. Now you will know if it is time for a new refrigerator or if that old air conditioner is still saving you money. Kill A Watt can help you reduce your power bill and will help find power-wasting appliances so you are able to decide whether it is worth keeping them plugged in. For standard 115 VAC appliances only, 15 amps maximum, 125 VAC maximum. Find Out How Much Electricity You're Using Large LCD display counts consumption by the kilowatt-hour The U.S Department of Energy reports that 20% of our electric bills come from items that are left plugged in when they are not in use, or items that are in standby mode. With the Kill A Watt P4400 we can monitor the energy eaters in our homes and cut down our electric bills at the same time. Plug whatever item you want into the device and it will tell you the efficiency of that item by displaying the kilowatt per hour. This device will help you determine which items are costing you the most to run. The Kill A Watt also calculates voltage, line frequency, current, and power factor. You can calculate your electric bill before you even receive it from the electric company. Test The Quality of Your Home's Power But measuring appliance consumption is just the tip of the iceberg. Because it can monitor voltage (Volt) and line frequency it can also test if an outlet is working, or evaluate the quality of the electrical power provided by your utility company. It can detect voltage drops around the house, help to predict brownout conditions or to make sure a new home's outlets are in working condition before escrow closes. The LCD shows all meter readings: volts, current, watts, frequency, power factor, and VA About P3 International Founded in 1987, P3 International is a privately owned manufacturer of solution oriented consumer products. For the last twenty years they have strived to develop products that are easy to use and ahead of their time. Thanks to their customer-centric attitude and support from their clients, they have experienced steady growth over the past decade. They are committed to manufacturing high quality products that appeal to a variety of different people, from the environmentally conscious to the more technologically-minded consumer. With this philosophy driving them they are always looking for innovative new products which they can offer their customers. Their unique products have garnered much attention, in particular the Kill A Watt. Reviews of P3 products have been featured in newspapers such as The New York Times and The Wall Street Journal. Technical Specifications Accuracy: +/- 0.2% Input Power: 115 volts AC, 60 Hz Max Current: 15 amps Max Voltage: 125 volts Max Power: 1875 VA Dimensions: 5.1 inches long x 1.6 inches thick x 2.4 inches wide Approvals: ETL (c), ETL (us) Origin: China Manufacturer Warranty: 6 months

Features

• Electricity usage monitor connects to appliances and assesses efficiency
• Large LCD display counts consumption by the kilowatt-hour
• Calculates electricity expenses by the day, week, month, or year
• Displays volts, amps, and wattage within 0.2 percent accuracy
• Compatible with inverters; designed for use with AC 115-volt appliances

List Price: $13.99
Sale Price: $2.99
You save: $11.00 (79%)

See Reviews For This Product

Description

Provides 10 tests for pH. Patented comparator test system.

Features

• Luster Leaf
• 1612
• Seed Starting

List Price: $76.95
Sale Price: $59.99
You save: $16.96 (22%)

See Reviews For This Product

Description

The C65 is a microprocessor based Conductivity Tester with a rugged one-piece IP67 waterproof casing. Immersible up to the LCD! This instrument is a low cost and easy to use Meter with a replaceable electrode.Some of the C64's features include:Automatic Temperature Compensation IP67 Waterproof Casing Replaceable Electrode Easy to Read LCD Easy to UseRange 0 - 1999 S/cmResolution-1 S/cmAccuracy - 2% full scaleCalibration - Manual 1 pointElectrode - Replaceable MA73075Temp. Compensation - Automatic 0 - 50CBattery Life - 250 hours of continuous useBattery Type 3 x 1.5VEnvironment 0 - 50C / 100% RH

Features

• Double Junction Replaceable Electrode
• Waterproof Casing
• Automatic Temperature Compensation
• Battery Life: 250 Hours of Continuous Use

List Price: $852.50

See Reviews For This Product

Description

Professional pH and Moisture Meter with 12" probe. Operation is simple. Clean the electrodes and place the meter into the soil. A pH reading is automatically displayed. Press rthe white button and a moisture reading is displayed. It works by utilizing the electronic ground filed effect of the earth and two dissimilar metals. No batteries are required. 1 year limited warranty.

List Price: $77.95
Sale Price: $56.07
You save: $21.88 (28%)

See Reviews For This Product

Description

Model T75 Waterproof TDS tester with automatic temperature compensation and 1 point manual calibration range: 0.0 to 1999 ppm (mg/L), replaceable MA73075 probe.

Features

• pH Electrode with Built in Temperature Sensor
• Replaceable electrode
• IP67 Waterproof casing
• Automatic Temperature Compensation
• Easy to use. Replacement electrode available.

Sale Price: $17.89

See Reviews For This Product

Description

This item is without retail box
Features :
With slim line pen-style design, it's easy to use and store.
Highly convenient, efficient and accurate
Display: Easy-to-read screen
Hold Function: Saves measurements for convenient reading and recording
Measurement Range: 0 - 1999ppm (mg/L)
Resolution: 1 ppm
Accuracy: +/- 2%F.S <
Power Supply: 2 x 3V (CR2030 Battery)
Dimension: 148mm (L) x 32mm (W) x 20mm (T) / 5.83inch (L) x 1.26inch (W) x 0.79inch (T)
Operating Temperature: 0°-50°(32°F-122°F)
6)Size: 150x27x20mm
7)With TDS calibration solution (1382ppm 25°C)

Features

• Highly convenient
• Display: Easy-to-read screen
• Saves measurements for convenient reading and recording
• Measurement Range: 0 - 1999ppm
• efficient and accurate

List Price: $51.95
Sale Price: $41.90
You save: $10.05 (19%)

See Reviews For This Product

Description

Replacement pH probe MA73600 for pH51.

Features

• OEM Replacement Part